Martin Archery Martin Compound - Manual (Page 14)

14
Adjusting the Seeker STS
Adjusting Seeker Grip
Loosen both grip clamps to adjust brace height.
The upper and
lower clamp
can be
adjusted
separately
to achieve
desired grip
angle.
Slide grip
forward
to desired
position.
1)
3)
Re-tighten grip clamps
so they are snug to
eliminate unwanted
movement.
2)
To Adjust the Seeker STS,
loosen both set screws.
You can now rotate the
STS to adjust offset, and
move it in and out to the
desired position.
Once the desired position
is found, re-tighten both
set screws so that they
are snug.
Brace Height Adjustment Specifications:
5.75” brace height - Draw Length from 27” to 30”
6.75” brace height - Draw Length from 28” to 31”
7.75” brace height - Draw Length from 29” to 32”
1)
2)
Seeker 365's Grip Adjustment
•To measure brace height, measure from the back of the grip to the shooting sting.
•To square grip, measure from the back of the upper and lower grip clamps to the shooting string.