Martin Archery Martin Compound - Manual (Page 13)

Both cable
stops are
touching in
unison. It is
perfect.
The top cable stop
is coming to rest
before the bottom.
Add a twist in the
cable that feeds
into the top module.
The top cable
stop is coming to
rest before the
bottom. Add a
twist in the cable
that is connected
to the top cam.
Both cable
stops are
touching in
unison. It is
perfect.
Correct Tuning Needs Adjusted
Furious
Nitro & Hybrix Cam
Correct Tuning Needs Adjusted
13
Cam tuning assures straight and level
travel of the arrow (nock travel) as it
travels thru and from the bow. Tuned
Cams will benefit accuracy and keep
noise and vibration to a minimum. To
determine if any tuning is necessary, first
draw your bow using your release aid
(if you use one when shooting), and an
arrow to prevent dry fire. As you approach
full draw, slow down and watch as the
cable stops (the ends of each draw
length module) move toward each cable,
as shown in the diagram. It is helpful to
ask a friend to examine this for you while
you draw the bow. Each cable should
contact the end of each cam’s draw length
module at the same time. If your cams
look like those on the left side of the
diagram, they are properly tuned. If one
cable touches before the other, as seen
on the right side of the diagram, some
tuning is required.
First, relax the bow properly in a
bowpress before attempting to make any
adjustments.
Tuning Duel Cams