Martin Archery Martin Compound - Manual (Page 11)

Your Hybrid Duo Cams (Nitro, Hybrix, C.A.T, etc.) are each equipped with a rotating
draw length module. Each draw length module has numbers that indicate draw length set-
tings. The Standard Module has positions that number #1 through #7, with each number
providing ½” additional draw length. The Long Module has positions #8 and #9. The higher
the # position, the longer the draw length.
Parts of Hybrid Duo Cams
11
Hybrid Duo Cams Systems
Changing the Hybrid Cams Draw Length
When you are adjusting the draw length, make sure
that both the upper and lower modules are in the same
setting. To rotate the modules, you will first need to
remove the two (2) allen head module screws. Rotate
the module to the desired position and replace and
tighten the screws in the appropriate positions.
DO NOT attempt to draw the bow without the
draw length modules in place and secured.
Hybrid Duo Cams String Diagram
Module
Module Screws
Speed Bearing
Draw
Stop
Shooting
String Anchor
Module Screws