Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-853 - Manual (Page 7)

7
Fig. 13
Fig. 14
Fig. 15
Fig. 17
7. Apply a bead of silicone sealant around flange of
chute (H) Fig. 14. Align holes in eight-hole gasket (K) Fig.
14, with mounting holes in chute (H) and press gasket
(K) onto flange as shown.
8. Align mounting holes in left hand drum (N) Fig. 15,
with gasket (K), assembled in STEP 7. Place a
lockwasher onto a hex head screw, and insert screw
through chute (H), thread screw into drum (N), and
tighten securely as shown in Fig. 16. Repeat this
process for the seven remaining holes.
9. Assemble the remaining eight hole gasket and right
hand drum to the blower chute in the same manner.
10. Fig. 17, illustrates the drums assembled to the dust
chute.
Fig. 16
H
K
N
K
H