LW Measurements HRB 224 Magnetic Force Balance - Manual (Page 5)

Getting Started
Storage and Shipping Conditions
í Do not expose the balance to extreme temperatures, moisture, shocks, blows or vibration.
Unpacking the Balance
After unpacking the equipment, please check it immediately for any external damage.
Ƞ If damage is evident, refer to the instructions under “Safety Inspection" in the chapter
entitled “Care and Maintenance."
Ƞ Save the box and all parts of the packaging for any future transport.
Disconnect all cables before packing the balance for shipping!
Installation
HRB Electric balance could provide a more reliable weighing result with normal
circumstance. Choose a location that is not subject to the following negative influences:
í Put on a stable and flat top
í Heat (heater or direct sunlight)
í Drafts from open windows and doors
í Extreme vibrations during weighing
í Avoid corrosive gas with certain protection
í Excessive moisture
Conditioning the Balance
Moisture in the air can condense on the surfaces of a cold balance whenever it is brought
into a substantially warmer place. If you transfer the balance to a warmer area, make sure to
condition it for about 2 hours at room temperature, leaving it unplugged from AC power.
3