LW Measurements HRB 224 Magnetic Force Balance - Manual (Page 17)

Application Programs
Weighing in Percent: ( Menu code: . . )
Purpose
This application program allows you to obtain weight readouts in percent which are in
proportion to a reference weight.
Features
í Storage parameter (rounding-off factor) for storing the reference weight
to calculate the percentage can be configured.
í Changing the reference sample percentage in the menu: reference the chapter Balance
setting.
í Optional automatic output of the reference weight to the data interface port when print
application parameters is set.
í Press and hold the (F) key (2 seconds) to set the reference percentage
í Toggling between percentage and weight by pressing (F).
Default/Initial parameter
Reference percentage 10( code: . . )
Preparation
Set parameters for the Weighing in percent program: reference Balance setting
Select the application program : Menu code: . . weighing in percent
Set the following parameters:
Code . . 5%
Code . . 10%
Code . . 20%
Code . . 50%
Code . . 100%
Please reference Balance setting
15