LW Measurements LBS Large Bench Scale - Manual (Page 11)

21
4.1.2 Key functions
- ON-OFF key turns the weighing machine on/off.
- HOLD key stores the weight value.
- ZERO (for TARE) is a ZERO feature if the load is below
10% of full capacity or is a negative value. It is a TARE
feature if the load is between 10% and full capacity. It
has a multiple tare function, but the total weight before
and after TARE must be less than full capacity.
- The PRINT key is used to send data to an external
device though the RS232 connector.
4. 2 Program options
Please see our website at http://lwmeasurements.com for
practical demonstrations of application usage.
4.2.1 Interface Settings
−
Press and hold the HOLD key, and then press the
ON/OFF key to turn on the weighing machine; display
will show A-ON or A-OFF.
−
Press the UNIT key, the display will show “L-ON” or
“L-OFF
−
Press the UNIT key again, display will show “P-XX”
−
Press ZERO key to select CON, OFF, KEY, STB
a) OFF means the serial data output is disabled
b) KEY means manual mode , press the [PRINT] key to
print
c) STB means data will automatically print when the
weighing machine is stable
d) CON means data will continuously print
22
e) Press the ON/OFF key to turn of the machine
4.2.2 Function settings
4.2.2.1 Setting auto Shut-off
Press and hold HOLD key, then press ON/OFF key to turn on
the weighing machine, display will show “A ON” or “A OFF”,
Press ZERO key to select Auto shut off mode
“ON” or “OFF”.
4.2.2.2 Setting backlight
Press and hold HOLD key, then press ON/OFF key to turn on
the weighing machine, display will show “A ON” or “A OFF”,
Press UNIT key, display will show “L ON”, “L OFF” or “L AU”,
press ZERO key to select back light On, Off or Au (auto).
4.2.2.3 Setting Power-on mode
Press and hold HOLD key, then press ON/OFF key to turn on
the weighing machine, display will show “A ON” or “A OFF”,
Press UNIT key three times, display will show “J ON” or “J
OFF”, press ZERO key to select “J ON” (means showing zero
when machine is turned on) or “J OFF” (means showing the
weight placed when the machine is turned on).
4.2.3 Working mode setting
−
Press the UNIT key, display will show F-Nor or F-PEA
or F-Ani. Press the ZERO key to select Nor, PEA or
Ani.
a) NOR means the normal weighing function is activated.
b) PEA means the peak hold weighing function is
activated.
c) ANI means the animal weighing function is activated.