Luxul XMS-1024 - Manual (Page 8)

User Guide
8 © Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
2.2 LED Indicators
Each port has one numbered Link/Activity LED and one 1000 Mbps LED. The SFP in-
terface shares the LED indicators with the corresponding Ethernet Port. In addition,
there is one System LED and one Power LED, as well as a Reset button to reboot the
device or restore factory default settings.
LED Indicators
The green LED indicators show the working status of the switch. The following
table describes the LED functionality:
Indicator
Name Description
Power On This LED indicates that there is power to the XMS-1024
Off If LED is off, check power connections and on/off
switch at the back of the unit.
Link/Act On The Link/Activity LED of the port will be on if there is
a device connected to the port.
Flashing The Link/Activity LED fl ashes when a port is receiving
or transmitting data.
Off There is nothing connected to the port.
1000 Mbps On The 1000 Mbps LED will come on if a device capable
of 1000Mbps is connected to the port.
Off If a port has no device connected or it is not a 1000
Mbps capable device, the 1000 Mbps LED will be off.
SYS On Indicates that the XMS-1024 is running normally.
Flashing Indicates that the XMS-1024 is restoring default
settings.
Off Indicates that the XMS-1024 is in startup and initializa-
tion process or is not on.