Luxul XAP-1040 - Manual (Page 21)

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
21
Wireless Profi les: This page allows confi guration of up to 8 Wireless Network
SSID’s:

Operating Mode: Sets the Operating Mode of the Access Point the available
options are;

Access Point: Allows client devices to connect (default mode)

Client: Allows the AP to connect to an existing network as a client device

Bridge Root: Sets the AP into Bridge Root mode allowing Bridge Clients to
connect (regular client devices cannot connect to this mode)

Bridge Client: Sets the AP into Bridge Client mode allowing it to connect to a
Bridge Root (regular client devices cannot connect to this mode)

Network Name (SSID): Sets the name of the Wireless Network. If the SSID is not
set on a profi le, the name of the network will not be broadcast.
NOTE: Profi le 1 is set during Quick Setup

SSID Broadcast: This gives you the option to hid the Network Name only allow-
ing devices that already have the profi le saved to see and connect to the AP.

Security Mode: Sets the wireless security encryption mode.

Encryption: This fi eld only shows while in WPA mode. It is used to select the
encryption method WPA will use (default is TKIP & AES).

WEP Key: This fi eld only shows while in WEP mode. Allows the input of a 128 bit
WEP key.

WPA Passphrase: Sets the passphrase for wireless network access.