Luxul XAP-1210 - Manual (Page 8)

Quick Install Guide XAP-1210
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0323150412
8
Connecting to the Power Source
The XAP-1210 is PoE ready and supports 802.3at PoE. A PoE injector is included
with the device. To apply power, simply connect the opposite end of the Ethernet
cable to which the access point is already connected to the provided PoE injector
or other PoE switch or injector. An Ethernet cable length of up to 300 feet can be
used. DO NOT yet apply power to the PoE injector or switch.
PoE Injector Setup
„
Data In: Connect an Ethernet cable from your router or switch
to the
Data In port of the included PoE Injector
„
Data & PWR Out: Connect an Ethernet cable from the Data & PWR Out
port of the included PoE Injector to the
PoE Port of the XAP-1210
„
AC Power: Connect the included AC Cord to the Power Input of the Included
Injector first and then to the AC outlet.
NOTE: The XAP-1210 is not a router and will need to be connected to
a network with a router in order to deliver Internet access.
Power
Source
POE
Injector
From your
Router or Switch
XAP-1210
DATA IN
DATA &
PWR OUT
The PoE Injector combines power and data to the XAP-1210
CAUTION: Because the XAP-1210 is a High-Powered access point it is
normal for it to be warm to the touch
NOTE: The XAP-1210 is designed to work with any 802.3at power
source.
NOTE: The XAP-1210 can also be powered by direct AC power. Contact
Luxul to purchase an AC Power Adapter.