Luxul XAP-1210 - Manual (Page 4)

Quick Install Guide XAP-1210
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0323150412
4
PoE Injector LED Indicators
Name Status Function
PWR On Power is connected to the injector
Off Injector is not receiving power
Reset Button:
The Reset button is used to clear the current settings of the XAP-1210 and restore
factory default settings.
To Restore the Default Settings: With the XAP-1210 powered on, press and hold
the Reset button for 15 seconds. Release the button and the XAP-1210 will be set to
factory defaults.
CAUTION: Pressing and holding the Reset button will remove any
custom confi gurations done to the XAP-1210.
PREPARING FOR INSTALLATION
System and Power Requirements
„
Computer with supported Web browser. Minimum supported web browser ver-
sions include: I.E. 9.0, Firefox 2.5, Safari 5.0, Chrome 3.0 and up. The Web browser
is used to confi gure the XAP-1210.
„
The POE injector power supply requires AC100V ~ 240V, 50Hz ~ 60Hz.
XAP-1210 INSTALLATION
Access Point Placement
The XAP-1210 high powered access point is designed for optimal performance as
well as for simple and effi cient installation and setup. It designed for mounting on
the ceiling, wall or placed on a desktop or other fl at surface. Because the signal
generated by the XAP-1210 is omnidirectional, the unit should be mounted on a
ceiling or wall directly in the center of the desired coverage area.
XAP-1210 Coverage Pattern