English – Denon DN-2100F User Manual
Page 19
19
ENGLISH
(“*” indicates the default setting.)
(0)
Preset Clear: This restores the preset data to the factory default values.
q The presettings are initialized when the TRACK SELECT knob is turned while set to “0 PS CL On”.
w “0 PS CL OF” is displayed when initialization is completed.
(1)
DSP play function selection: Selects the DSP mode playback function.
* ”1 S-LOOP”
:
Seamless loop play mode
“1 digi-S”
:
Scratch mode
(2)
Auto Cue ON/OFF
* “2 A-CUE On”
:
The cue point is detected at a sound level of –54 dB.
“2 A-CUE OF”
:
Cue detection is not performed.
(3)
Relay mode function selection: The relay playback mode can be selected with the CONT./SINGLE button.
”3 rELAY On”
:
The relay play mode can be selected.
* “3 rELAY OF”
:
The relay play mode cannot be selected.
(4)
Digital Out
“4 D-Out On”
:
Digital data is output. (NOTE: The operable functions are limited.)
* ”4 D-Out OF”
:
Digital data is not output.
(5)
E.O.M
* ”5 End OF”
:
No end of message is emitted.
“5 End (setting time)”
:
Set the end of message time. (10, 15, 20, 30, 60 or 90)
(6)
Pitch Range
“6 Pitch (setting value)”
:
Select the pitch adjustment range (16, *10).
(7)
Auto Close: Set the disc tray auto close mode.
“7 CLOSE OF”
:
The disc trays do not close automatically.
“7 CLOSE (setting time) ” :
Set the time from which the disc tray is opened until it is closed automatically (10, *30 or 60).
(8)
Power on play: Single relay playback starts automatically when the power is turned on.
“8 P-On P On”
:
Power on play on
* ”8 P-On P OF”
:
Power on play off
(9)
Play Mode: Set the play mode which is set when the power is turned on.
* ”9 Single”
:
Playback ends at the end of the track.
“9 Cont”
:
Playback continues until the end of the disc.
(10) Time Mode: Set the time mode which is set when the power is turned on.
”10 ELAPS”
:
The elapsed time per track is displayed.
* “10 rEMAIn”
:
The remaining time per track is displayed.
“10 t-ELAPS”
:
The elapsed time per disc is displayed.
“10 t-rEMA In”
:
The remaining time per disc is displayed.
(3) Detailed Description of Preset Functions