Lamar Technologies Alpha C-25 - Manual (Page 13)

3. OPERATING GUIDE
ALPHA C-25 Manual V2.1.doc Page 13
H. PUSH START BUTTON
The timer starts. The On lamp and the red
LED on the timer illuminate. The voltmeter
displays the battery terminal voltage and the
ammeter reads zero.
I. SET CHARGE CURRENT
1. FOR CONSTANT-CURRENT
CHARGING
Turn the Ampere Adjust knob until the
desired charge current has been reached.
The charge current is displayed on the
ammeter as the current is being adjusted.
2. FOR CONSTANT-POTENTIAL
CHARGING
Turn the Ampere Adjust knob to max (fully
clockwise) or to the desired current limit. The
charge current is displayed on the ammeter
as the current is being adjusted.