Lamar Technologies BETA D-50 - Manual (Page 35)

CERTIFICATION OF CALIBRATION
REPORT AND CERTIFICATION OF CALIBRATION
Manufacturer:
Lamar Technologies LLC, 14900 40 th Ave NE, Marysville WA 98271
360-651-8869 www.lamartech.com/powerproducts
Date of Test__________ NSN: 6130-01-462-6337 & 6130-21-258-4430
P/N ____________ S/N____________ Model Beta D-50 MFR Date________
Description:
Military Battery Charging Battery Discharge
Commercial Combination Charger/Discharger
Other __________________________________________________
Notes on Calibration:
1. All instruments used for calibration are calibrated to standards traceable to
National Institute of Standards and Technology.
2. Test instruments are calibrated annually by a certified test laboratory in compliance
with the Calibration Systems Requirement of ISO/IEC 17025:2005, ANSI/NCSL
Z540-1-1994, and a quality system registered to ISO 9001:2008
Report: Test Instruments Used:
Fluke 8010A Fluke 73
Empro Standard Shunt, 0.5% Leader Oscilloscope LS1020
Standard Cell Reference: Other: _____________________
EMF Reading for Multimeter
before each test to 1.019V.
Results:
All controls within specification.
All digital/analog displays within calibration specification.
Shipped condition all in tolerance, passed.
Tested by _________ Date _________ Approved By _________ Date _________
Calibration due one year from date of first use: Recommended Required
BETA D-50 TESTER / ANALYZER - OPERATING MANUAL V2.2 Page 33