Laerdal SimView User Manual

Page 10

Text mode
Original mode

Figure 10 The Profile editor setup for the SimMan3G



Enable Use video server (AVS)



Insert the IP address, (“localhost” or “127.0.0.1” is not allowed) for the PC running the Instructor
Application.



Enable monitor recording



Set the quality to High, screen size on patient monitor not to exceed Full HD (1920x1080 pixels)
Use the Save as.. to save the profile and the press Close



You must the start a new session in order to use the new profile.

Tip! When SimMan3G starts, you can make sure that the profile you saved is the one that is used for the
session:

Figure 11 The SimMan3G start screen showing the profile used