Denso CLASSIC PLUS 14 - Manual (Page 11)

5
INSTALLATION
Choosing and Installation Site
ƽCAUTION: Following are some precautions to consider before
choosing your installation site. Please review carefully as improper
installation may result in personal injury or damage to the unit.
• Do not use the unit in areas where leakage of flammable gas may
occur.
• Do not use the unit in areas where it will be exposed to rain or
water.
• Do not use the unit in an atmosphere of excessively corrosive gas
or vapor.
• Do not use in areas where the temperature is outside the allowable
operating range.
• Do not install the unit in sloping areas. The unit may move or topple
over even if the caster levers are set to LOCKED.
• Install the unit in areas that can withstand the weight of the unit.
The Classic Plus 14 unit weighs approximately 200 lbs (91 kg) and
the Classic Plus 26 unit weighs about 280 lbs (127 kg) (when the
drain tank is full of water).
• Allow 18 inches of unobstructed airflow for both air inlets and
outlets.
• Do not use the unit above 113˚F 50% RH.