Denso CLASSIC PLUS 14 - Manual (Page 10)

4
INVENTORY & ASSEMBLY
Assembly
ƽCAUTION: Before assembling
make sure the unit is on a flat, level
surface and the casters are in the
LOCKED position. (Both the Classic
Plus 14 and Classic Plus 26
MovinCool units have locking swivel
casters in the front only.)
Install each cool air outlet duct using 4 screws each as shown.
NOTE: Do not overtighten the screws when installing the cool air
outlet ducts. This could damage the base on the cool air outlet
duct assembly.
LOCKED
UNLOCKED
COOL AIR OUTLET
DUCT (2)
SCREW (4 PER DUCT)