Labconco XPert Nano Enclosures 38876 Series - Manual (Page 6)

Product Service 1-800-522-7658 1
Chapter 1:
Introduction
Congratulations on your purchase of a Labconco XPert ® Nano Enclosure. Your
enclosure provides personnel protection through superior containment while
conserving energy at OSHA approved velocities as low as 60 feet per minute. It is
the result of Labconco’s more than 50 years of experience in manufacturing fume
hoods and more than 30 years of experience in manufacturing filtered enclosures.
These enclosures will effectively contain toxic or noxious particulates when
properly installed and operated. Each Nano Enclosure uses an ULPA filter, which
is rated at least 99.999% efficient for 0.12-micron particles. The XPert Nano
Enclosures offer many unique features to enhance safety, performance, and energy
savings. To take full advantage of them, please acquaint yourself with this manual
and keep it handy for future reference. The XPert Nano Enclosures include a true
bag-in/bag-out ULPA filter to properly protect personnel during filter changing
operations.
If the unit is not operated as specified in this manual it may
impair the protection provided by the unit.
Si l'unité n'est pas utilisée comme spécifié dans ce manuel il
peut diminuer la protection fournie par l'unité.
Typographical Conventions
Recognizing the following typographical conventions will help you understand and
use this manual:

Steps required to perform a task are presented in a numbered format.

Comments located in the margins provide suggestions, reminders, and
references.

Critical information is presented in boldface type in paragraphs that are
preceded by the exclamation icon. Failure to comply with the information
following an exclamation icon may result in injury to the user or permanent
damage to the enclosure.
!
!