Labconco Precise Controlled Atmosphere and Basic Glove Boxes 5220131 User Manual
Page 42

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658
38
13. Automatic Pressure Controller
The Pressure Controller allows the end user the convenience of
automatically regulating pressure and vacuum within the glove box
main chamber and transfer chamber. The end user can also automate
the purge/fill cycles up to 199 cycles for each chamber. The vacuum
and pressure can be automatically regulated between -5 to +5 inches
of water gauge in the main chamber and between 0 to -29 inches of
mercury gauge in the transfer chamber. See illustration below and
figures in Chapter 3.
Part #
Descriptions
5238600
Pressure Controller 115V or 100V
5238601
Pressure Controller 230V International
This manual is related to the following products:
- Precise Controlled Atmosphere and Basic Glove Boxes 5220130 Precise Controlled Atmosphere and Basic Glove Boxes 5220121 Precise Controlled Atmosphere and Basic Glove Boxes 5220120 Precise Controlled Atmosphere and Basic Glove Boxes 5220100 Precise Controlled Atmosphere and Basic Glove Boxes 5220031 Precise Controlled Atmosphere and Basic Glove Boxes 5220030 Precise Controlled Atmosphere and Basic Glove Boxes 5220021 Precise Controlled Atmosphere and Basic Glove Boxes 5220020 Precise Controlled Atmosphere and Basic Glove Boxes 5220000