Labconco FreeZone Triad Freeze Dry System 74000 Series - Manual (Page 17)

Chapter 4: Operating Instructions
Product Service 816-333-8811 or 1-800-522-7658 13
Triad Freeze Dry System Controls
The control panel for the Triad Freeze Dry System is shown with a
description about its function.
1.
Display: Displays all necessary programming and operational data. Provides
prompts to aid in programming.
2.
Display Button: Changes format of display from “monitor” to “auto” to
“manual” to “set up” screen.
3.
Display Indicators: Green INDICATOR shows which display “screen” is
shown.
4.
Alarm Indicator: Red INDICATOR shows that a system alarm has occurred.
5.
Defrost: Used to manually start or stop the defrost operation.
6.
Vacuum: Used to manually start or stop the vacuum pump.
7.
Decrease Button: Used in programming to decrease a parameter set point.
8.
Increase Button: Used in programming to increase a parameter set point.
9.
Enter Button: Used in programming to enter a selected set point into
memory.
10.
Mode Selector Button: Selects the mode of operation – either manual or
automatic.
11.
Mode Indicator: Green INDICATOR shows whether the control is set to
operate either in the automatic or manual mode.
Figure 2