Quick start tutorial 17 – Lab.gruppen LM 44 User Manual
Page 23
Quick Start Tutorial
17
Lake LM Series Quick Start and Field Reference Guide Rev 1.2.8
When using large Lake processor systems it is recommended that a computer exceeding the minimum
specifications is used. If you are unsure about installing PC software, please contact an IT specialist.
6.3.2 Software Installation
The Lake Controller software is installed by inserting the CD in the computer’s CD drive and allowing
the auto-setup routine to run. Select INSTALL then LAKE CONTROLLER SOFTWARE on the software
installation screen that is displayed. For most installations, the suggested default installation paths can be
accepted.
If you are using a computer without a CD/DVD drive, the latest software can be downloaded frofter completing an online registration form. It is
recommended that all users verify they are using the latest version of software.
Once the software is installed, the application is launched by double-tapping the LAKE icon on the Windows
desktop. Please refer to the Lake Controller Operation Manual for further details on software installation and
PC configuration.
6.3.3 Software and Firmware Updates
Regular software and firmware updates are available for the Lake Controller software and LM Series
devices. Please check for updates regularly to ensure you have the latest features and improvements.
Registered users will receive email notification of updates as they become available. The latest updates are
also available fro
Please refer to the Lake Controller Operation Manual for further details on the firmware upgrade procedure.
6.3.4 Ethernet Configuration
This device provides control, monitoring and digital audio functionality via an Ethernet network.
For further information on the setup and configuration of an Ethernet network, please refer to the
Lake Controller Operation Manual and the Lake Network Configuration Guide.