beautypg.com

Technical specifications 24, D series tesira quick start guide rev 1.2.0 – Lab.gruppen D Series 80:4T/Ta User Manual

Page 24

background image

15. Technical Specifications

24

D SERIES Tesira Quick Start Guide rev 1.2.0

D 200:4T/Ta

D 120:4T/Ta

D 80:4T/Ta

Back panel user interface

Optional analog inputs

4 x Terminal block connectors mic/line level analog input with +,- and ground

Output connectors

4 x 2 pole Terminal block connectors rated at 1000 V / 76 A (exceeding amplifier capacity)

Can take up to 16 mm

2

(6 AWG) cables

Ethernet ports

1 x RJ45 Tesira

®

Control, AVB networked Audio

General purpose I/O

Local GPIO for power state management and amplifier surveillance

Detachable mains cord

Neutrik PowerCon rated at 250 V / 32 A

Front panel user interface

System status indication

3 x 3 colored LED. ALARM, ACTIVITY, STATUS for Tesira

®

system status and Device STATUS indication

Channel status indication

3 x 3 colored LED per channel. Status indication separated for channel LOAD, AMP, SIGNAL status

Mute

Per channel touch button for MUTE control and bicolored LED for indication

Power

Touch button for ON/SLEEP control and 3 colored LED for power state indication

Select

Touch button and LED for bidirectional device software select functionality

Mains Power
Nominal voltage

100 - 240 V AC 50 - 60 Hz

Operating voltage

70 - 265 V AC 45 - 66 Hz

Mains wall plug

Selectable on order

CEE 7/7 “Schuko” 230 V / 16 A,

NEMA L5-30 “Twistlock” 125 V / 30 A,

NEMA 5-15P 125 V / 15 A (D 80:4 only),

NEMA 5-20P 125 V / 20 A (D120:4 only),

NEMA 6-20P 250 V / 20 A,

AS/NZS 3112 230 V / 15 A (Aus/Nz),

BS 546 230 V / 16 A (India),

C-30P 125V / 30A (Japan)

Power supply features
Soft start / Inrush power

Yes / Max 8 A

Power factor correction

> 0.98 for mains power > 400 W

Regulated switch mode power supply (R.SMPS)

Yes

Breaker Emulation Limiter (BEL)

Configurable current threshold and breaker profile

BEL max current threshold

32 A

25 A

15 A

Power Average Limiter (PAL)

Yes

Under Voltage Limiter (UVL)

Yes

Mains undervoltage and overvoltage protection and

mains glitch tolerance

Yes

Dimensions
Rack rail to rear panel

W: 483 mm (19”), H: 88 mm (2 U), D: 424 mm (16”)

Overall all depth front-rear support

D: 463 mm

Weight

16.5 kg (36 lbs)

15.8 kg (35 lbs)

14.5 kg (32 lbs)

Finish

Black painted steel chassis with grey painted steel front with detachable grille

Approvals

CE, ETL (ANSI/UL, CSA), PSE, RCM

Note 1): Lab.gruppen burst power (1 kHz, 25 ms burst power @ 150 BPM, 12 dB Crest factor)

All specifications are subject to change without notice.

This manual is related to the following products: