Technical specifications, D series lake quick start guide rev 1.2.0 – Lab.gruppen D Series 80:4L User Manual
Page 27

15. Technical Specifications
D SERIES Lake Quick Start Guide rev 1.2.0
27
D 200:4L
D 120:4L
D 80:4L
Back panel interface
Analog inputs
4 x Terminal block connectors along input with +, - and ground
AES inputs
2 x Terminal block connectors
Output connectors
4 x 2 pole Terminal block connectors rated at 1000 V / 76 A (exceeding amplifier capacity)
Can take up to 16 mm
2
(6 AWG) cables
Ethernet ports
2 x EtherCon RJ45 100/1000 Base-T for the Lake Controller, Dante controller and/or DLM (3rd party protocol)
Detachable mains cord
Neutrik PowerCon rated at 250 V / 32 A
Front panel user interface
System status indication
3 x 3 colored LED. FRAME, TEMP, PSU for device status indication
Channel status indication
3 x 3 colored LED per channel. Status indication separated for channel LOAD, AMP, SIGNAL status
Mute
Per channel touch button for MUTE control and tricolored LED for indication
Power
Touch button for ON/STANDBY control and tricolored LED for power state indication
Select
Touch button and LED for bidirectional device software select functionality
Mains Power
Nominal voltage
100 - 240 V AC 50 - 60 Hz
Operating voltage
70 - 265 V AC 45 - 66 Hz
Mains wall plug
Selectable on order
CEE 7/7 “Schuko” 230 V / 16 A,
NEMA L5-30 “Twistlock” 125 V / 30 A,
NEMA 5-15P 125 V / 15 A (D 80:4 only),
NEMA 5-20P 125 V / 20 A (D120:4 only),
NEMA 6-20P 250 V / 20 A,
AS/NZS 3112 230 V / 15 A (Aus/Nz),
BS 546 230 V / 16 A (India),
C-30P 125V / 30A (Japan)
Power supply features
Soft start / Inrush power
Yes / Max 8 A
Power factor correction
> 0.98 for mains power > 400 W
Regulated switch mode power supply (R.SMPS)
Yes
Breaker Emulation Limiter (BEL)
Configurable current threshold and breaker profile
BEL max current threshold
32 A
25 A
15 A
Power Average Limiter (PAL)
Yes
Under Voltage Limiter (UVL)
Yes
Mains undervoltage and overvoltage protection and
mains glitch tolerance
Yes
Dimensions
Rack rail to rear panel
W: 483 mm (19”), H: 88 mm (2 U), D: 424 mm (16”)
Overall all depth front-rear support
D: 463 mm
Weight
16.5 kg (36 lbs)
15.8 kg (35 lbs)
14.5 kg (32 lbs)
Finish
Black painted steel chassis with grey painted steel front with detachable grille
Approvals
CE, ETL (ANSI/UL, CSA), PSE, RCM
Note 1): Lab.gruppen burst power (1 kHz, 25 ms burst power @ 150 BPM, 12 dB Crest factor)
All specifications are subject to change without notice.