Konig Electronic Camera and recorder in housing - Manual (Page 2)

2
ENGLISH
Introduction
The motion detector is ideal for hidden security and observation. In the PIR housing there
is an SD card reader (SD card not included) for recording, integrated with unique motion
detection technology. The recorder is used to constantly record but it will not store data if
there is no movement detected. If movement is detected the recorder will start storing the
data 3 seconds before movement is detected. This technology ensures that no movement is
lost and everything is captured. It is equipped with IR LED for night vision and microphone.
The SAS-DVRPIR10 comes with a remote control for easy operation.
Description
1. LED light
2. Camera
3. IR receiver
4. Mic
5. Standby indicator
6. AV out
7. USB port
8. TF card slot
9. DC plug
1. Power On/Off
2. Set
3. Bracket
4. Power indicator
5. Motion detection (trigger)
Settings
1. Connect the motion detector to your notebook, either directly or with a USB connection.
Turn on the power.