Konig Electronic WLAN router 300 Mbps - Manual (Page 54)

3.3.5.4 Reset to default
You can also reset this product to factory default by clicking the Reset to default button.
You can also reboot this product by clicking the Reboot button.
3
.3.5.6 Miscellaneous Items
MAC Address for Wake-on-LAN
Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy
this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this
device, say 00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to
the target device immediately.
Domain Name or IP Address for Test
Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened
by an
authorized technician when service is required. Disconnect the product from mains
and other equipment if a problem should occur. Do not expose the product to
water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of
this product.
54