Dimension One Spas AQUATIC FITNESS SYSTEM 2003 - Manual (Page 18)

Aquatic Fitness System
2003 Owner’s Manual
Filter Cycles
Standard Mode
Standard Mode heating is automatically controlled by the loss of water temperature. If the spa water drops
2°F (1.1°C) below the set temperature, the low speed pump and the heater will automatically turn on. They
will both remain on until the water temperature reaches the temperature set point.
In this mode, the filter cycle operates independently of the need for heat to ensure proper
filtration.
Set the display to F1 to receive two (2) hours of filtration twice a day. To select filter
cycle F1, press and hold the Warmer and Cooler Buttons for three (3) seconds. Then
press the Warmer (Up) Button, or the Cooler (Down) Button until you see F1
displayed in the window.
You have now successfully selected to receive two (2) hours of filtration twice a day
and maintain your water temperature separately. The programming mode will
automatically store your choice and exit if you don’t make another change within
three (3) more seconds.
Set the display to F2 to receive two (2) hours of filtration three times a day. To select
filter cycle F2, press and hold the Warmer and Cooler Buttons for three (3) seconds.
Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see F2
displayed in the window.
You have now successfully selected to receive two (2) hours of filtration three times a
day and maintain your water temperature separately. The programming mode will
automatically store your choice and exit if you don’t make another change within
three (3) more seconds.
Set the display to F3 to receive two (2) hours of filtration four times a day. To select
filter cycle F3, press and hold the Warmer and Cooler Buttons for three (3) seconds.
Then press the Warmer (Up) Button, or the Cooler (Down) Button until you see F3
displayed in the window.
You have now successfully selected to receive two (2) hours of filtration four times a
day and maintain your water temperature separately. The programming mode will
automatically store your choice and exit if you don’t make another change within
three (3) more seconds.
14