Kent Razo E17 - Manual (Page 7)

INSTRUCTIONS FOR USE
Razor E17
— 909 6311 000(1)2006-01 5
MACHINE DESCRIPTION
OPERATION CAPABILITIES
This scrubber-dryer is used to clean (scrubbing and drying)
smooth and solid floors, in civil or industrial environment,
under safe operation conditions by a qualified operator.
The scrubber-dryer cannot be used for moquette and carpet
cleaning.
CONVENTIONS
Forward, backward, front, rear, right or left are intended
with reference to the operator’s position, that is to say with the
hands on the handlebar (2, Fig. C).
DESCRIPTION
Control panel
(See Fig. B)
1. Control panel
2. Brush/pad switch
3. Vacuum switch
Exterior rear view
(See Fig. C)
1. Serial number plate/technical data
2. Handlebar
3. Handlebar inclination adjusting knob
4. Solution flow control lever
5a. Solution flow control lever ECO position (water
“economy” usage, for a washing autonomy of 70-80
minutes).
5b. Maximum solution flow
5.
Recovery water tank cover
6. Rear support wheel for transport/parking
7. Central wheels on fixed axle
8. Brush/pad
9. Brush/pad cover
10. Squeegee
11. Squeegee fixing handwheels
12. Front squeegee blade
13. Rear squeegee blade
14. Squeegee blade fixing springs
15. Recovery water drain hose
16. Recovery water drain hose bracket
17. Solution drain valve
18. Squeegee lifting/lowering lever
19. Solution filter
20. Power supply cable
21. Squeegee vacuum hose
22. Transport/parking device
23a. Transport/parking device activated
23b. Transport/parking device deactivated
23. Transport/parking device positioning pin
24. Brush/pad support (activated)
25. Recovery water tank
26. Solution tank
Under-tank front view
(See Fig. I)
1. Recovery water tank cover (open)
2. Recovery water tank cover gasket
3. Brush/pad support (activated)
4. Recovery water tank
5. Solution tank
6. Vacuum grid with automatic shut-off float
7. Recovery water drain hole
8. vacuum system motor
9. Brush/pad motor
10. Cover with brush/pad-holder coupling pin
11. Machine speed adjusting screw
12. Brush
13. Pad-holder
14. Pad
15. Terminal board box
16. Screw
17. Compensation hole
18. Cover stand (applied)
TECHNICAL DATA
General Values
Cleaning width 17.0 in (430 mm)
Machine width (without squeegee) 22.4 in (570 mm)
Minimum machine length with adjustable
handlebar
36.6 in (930 mm)
Minimum machine height with adjustable
handlebar 40.2/44.7 in
(1,020/1,135 mm)
Squeegee width 28.3 in (720 mm)
Machine weight (with brush) 148.5 lbs (67.5 Kg)
Central (fixed axle) wheel diameter 9.8 in (250 mm)
Brush/pad diameter 17.0 in (430 mm)
Wheel pressure on the ground <0.5 N/mm
2
Brush/pad pressure on the ground (with
full tank)
61.6 lbs (28 Kg)
Performance Values
Vacuum system capacity
56.2 in H 2 O (1,316
mm H 2 O)
Sound pressure level 76 dB(A)
vacuum system motor power
550 W 50Hz
550 W 60Hz
(for US)
Brush/pad motor power
1,100 W 50Hz
550 W 60Hz
(for US)
System voltage 230 V
Clean water tank capacity 8 gal (31 liters)
Recovery water tank capacity 7.9 gal (30 liters)