JUGS Sports Cricket Bowling Machine - Manual (Page 26)

24
▲
(Figure 10)
Position the wheels pointing upward. The greater the upward angle, the steeper
the angle of the fly ball or the pop-up will be. For best results, loosen the ball chute
lock knob and remove the ball chute. This will then allow you to “push” the ball
into the sleeve.
The angle of the fly ball, the pop-up, or the grounder, can be adjusted by loosening
the handle-bar lock knob (power off) and changing the angle of the wheels.
Different spins can be put on the ball by changing the speed-dial settings.
! WARNING: Keep hands and fingers away from the tires and tire-side edges
of the ball chute. When bowling pop-ups, the operator must wear
a catcher’s mask. When finished bowling flyballs and pop-ups,
always reconnect the ball chute and tighten the ball-chute lock
knob.
Fielding Practice
Fielding Practice
Your JUGS bowling machine
can be locked in one position,
or you can loosen and remove
the horizontal adjustment
T-clamp, which will allow you
to turn the bowling machine
freely from side to side.
Fly Balls and Pop-ups
Figure 9 Ground Balls
Figure 10
Fly Balls & Pop-Ups
Grounders (Figure 9)
Position the wheels so they point downward. The
greater the downward angle, the bigger the hop
will be on the groundball.