JUGS Sports Cricket Bowling Machine - Manual (Page 15)

13
▲
• To move the bowling machine, slowly tip the machine over until the tires rest
on the ground. Grasp and lift two legs and roll on its wheels to the new location
as you would a wheelbarrow. The JUGS bowling machine will fit in the trunk of
a car when its legs are removed.
• Do not roll the tire on surfaces that might damage it. If the tire becomes
deformed, flat, or damaged, it must be repaired before using the machine.
(See tire specifications, on page 18.)
! WARNING: Never leave bowling machine unattended.
▲
IMPORTANT:
Always set up the bowling machine so that two legs are positioned in front, facing
the protective screen and batter, and one leg is facing back toward the operator.
6. Check both speed dials and make sure they are in the full counter-clockwise
position (pointer at “0” setting) and the toggle switch is in the OFF position.
7. Plug heavy-duty No.-16-gauge, three-prong, extension cord into GFCI outlet
and connect to the short cord on the bowling machine. Place the protective
screen in front of the bowling machine to protect the operator and the bowling
machine from batted balls.
8. Loosen the handle-bar lock knob on top of the handle bar and position the
machine to aim at the desired target. Tighten the handle-bar lock knob. (You
will have to practice this targeting so you will know how to set the machine for
each delivery.)
! WARNING: The T-Clamp and all lock knobs must be tightened firmly before
using the bowling machine. The Horizontal Adjustment must
always be tightened securely before bowling deliveries.
Transporting