JUGS Sports Cricket Bowling Machine - Manual (Page 11)

▲
power and causing the motor to overheat.
When working with the machine outdoors, use an extension cord designed for
outside use. This is indicated by the letters “WA” on the cord’s jacket. Before
using the extension cord, inspect it for loose or exposed wires and cut or worn
insulation.
! WARNING: Keep the cord away from the rotating tire area. Repair or replace
a damaged or worn cord immediately.
Electrical Connection
Your JUGS bowling machine is powered by a 90-volt motor for a 110-volt outlet,
or a 180-volt motor for a 220-volt outlet. Do not operate this machine on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor
will overheat. If the machine does not operate when plugged into an outlet,
double- check the power supply. Your bowling machine will operate under a
standard AC outlet.
This machine is intended for use on a circuit that has a U.S. outlet like the one
shown in Figure 2. It also has a U.S. grounding pin like the one shown.
9
Figure 2
U.S. GROUNDED GFCI
OUTLET BOX
GROUNDING PIN