Imaxrc X400 twins - Manual (Page 9)

Present
Setting
1
1
2
Battery Type:
LiPo
Mode:
Balance
Cells:
2Cells 7.4V
Current:
C 2.0A D 1.0A
Present
Setting
1
1
2
Battery Type:
LiPo
Mode:
Balance
Cells:
2Cells 7.4V
Current:
C 2.0A D 1.0A
7
【NOTE】 Please read Disclaimer before doing anything.
Image 3
Disclaimer
Copyight
Contact us
Factory settings
Restart
COMPANY: iMaxRC CO.,LTD.
ADDR: F4 201-205, F518 IDEALAND Baoyuan Road, Baoan,
Shenzhen,P.R.C
TEL: +86 755 89830228
FAX: +86 755 29558361
E-mail: [email protected]
8
Image 4
Information Bar
Channel Bar
Action Bar
6: Enter into main interface after accepting( Image 4 ). Start to charge and discharge
according to the different battery.
Example 1:Choose a set of LiPo battery charging,please follow the below steps:
Image 5
Step 1: Touch Type( Image 5 ) Enter into the “Type interface”, and then Touch :LiPo (
Image 6 ) will Enter into main interface go on the next step.
Image 6
【NOTE】 Information bar can not get touched. In the Channel Bar, you can set the
working channel. In general, the system default is 1 working channel. After set the 1
working channel, you can choose 2 working channel to continue setting.
Chapter 1 Preparing、Connecting、Using Chapter 1 Preparing、Connecting、Using