Imaxrc X400 twins User Manual
Page 8
5
3:
Plug your battery into the output cable. if you are charging a LiPo battery, plug
the balance board into the output port and then plug its balance connector into the
matching balance board.
6
4:
Sarting X400Twins
Startup X400Twins to enter the main interface ( Image 1 ).
Showing“Warning and Disclaimer” 2 seconds and will know the copyright and security
information ( Image 2 ). It will be enter into the contacting interface if you can not agree with
the disclaimer, and then you could contact the distributor return the charger ( Image 3 )
Image 1
Image 2
Chapter 1
Preparing、Connecting、Using
Chapter 1
Preparing、Connecting、Using