HITEC Optic 5 2.4 - Manual (Page 15)

Page 14
Minima Series Receiver Features
SmartScan Function
The SmartScan is a unique function of Hitec’s AFHSS 2.4GHz technology providing the user with the cleanest and most stable frequency
channels even in the most crowded environments.
5
5
2. 4G Hz 6 C ha nn el
Ai rc ra ft Re ce ive r
2. 4G Hz 6 C ha nn el
Ai rc ra ft Re ce ive r
8
[Minima or Micro series Receivers]
When they are turned on again, the RED LED on the module(or radio)
and the BLUE LED on the receiver will glow steady.
[Optima series Receivers]
When they are turned on again, you will hear a continuous beep sound.
Both RED LEDs on the module and receiver will glow steady in normal
status.
3Sec.
The Spectra 2.4 Module will scan the frequency to find the cleanest and the most stable
frequency in any area. (The BLUE LED on the module will blink during the scanning.)
When the scan is completed, the BLUE LED on the module stops blinking and glows steady.
Re-boot the transmitter (turn Off and On) and follow the link process with your receiver.
3Sec. 3Sec.
NOTE
After Scanning, you need to do the link process again for all your receivers as receivers need new
fre uency hopping codes from the Spectra 2.4 module.
Turn on the transmitter.
Press and hold the LINK button on the Spectra 2.4 Module for about 6 sec.
Release the LINK button when you hear two continuous beeps.
Channel
2.
4G
Hz
6
C
ha
nn
el
Receiver
Ai
rc
ra
ft
Re
ce
ive
r
8