HITEC Optic 5 2.4 - Manual (Page 12)

Page 11
1. Function Link Button
Used for Linking (ID-Setting) the receiver to a module,
entering Fail-Safe / Hold mode set-up function.
2. Dual LED Status indicator indicates the set-up process codes and use status.
3. Channel Output and Battery Input Ports for battery
power, servos, gyros and other accessories.
4. BODA (Boosted Omni-Directional Antenna) System
The M-BODA Antenna System is designed to provide a
safe flying environment. It consists of two antennas that
help you fly more safely.
Minima 6T Receiver Features
As of this writing, there are three Optima and two Minima 2.4GHz receivers that are compatible with Hitec AFHSS 2.4GHz System.
The Optima 6, Optima 7, Optima 9 and the Minima 6T and 6E are loaded with a variety of functions that are sure to deliver a satisfying
R/C experience.
The Minima 6T(or Minima 6E) receiver is offered as a standard receiver for the Optic 5 and you can purchase an Optima series receiver to utilize
the “telemetry function”. With an Optima series receiver, you may enjoy the basic “low voltage battery warning” function and all other full telemetry
functions like RPM, temperature, fuel gauge, GPS, voltage and current sensing. (To activate the full telemetry function, an HTS-SS (Blue) sensor
station and desired sensors are required.)
SmartScan Function
Select between two operational signal types. See page 14 for details.
FAIL-SAFE Option
Servos and other accessories may be programmed with a FAIL-SAFE
point in the event power to the receiver is interrupted.
See page 16 for details.
Warning : Verify your servos are rated for use with these higher voltage batteries or use a regulator.
Functions:
5
5
2.4GHz 6 Channel
Aircraft Receiver
Hitec AFHSS 2.4 GHz Receiver system
OPTIMA 9
OPTIMA 7 OPTIMA 6
MINIMA 6E
2.4GHz 6 Channel Aircraft Receiver
CH1 CH1 CH1 CH1 CH1 CH6/BAT
OPTIMA 6
LITE