HITEC Extra 300S - Manual (Page 4)

The Weekender Extra 300S is a Plug and Play (P2GO) type model that requires additional items for operation. The items
listed below are needed to fl y.
• 4-Channel Radio and Receiver
• 3 ~ 4S, 11.1 ~ 14.4V, 2200 ~ 2500mAh LiPo Battery
• Charger Suitable for the Battery Above
features
• Durable pre-painted EPO airframe can easily be
assembled in less than 45 minutes
• Powerful preinstalled brushless outrunner motor and
50Amp ESC gives the Extra 300S plenty of power for
aerobatic fl ight
• Preinstalled 17 gram micro servos
• Removable cowl for ease of motor and ESC access
• 8 Minute + runtimes when used with recommended
battery
Specifi cations
• Wingspan: 47.2 in (1200 mm)
• Length: 42.5 in (1088 mm)
• Weight: 3.1 lb (1400 g)
• Wing Area: 418 sq in (26.97 dm 2 )
• Wing Loading: 17.1 oz/sq ft (52.1 g/dm 2 )
• Assembly Time: <45 minutes
note: Before assembly, it is important that you remove the parts from the packaging and check to make sure
that all the parts are included and that they are in good condition.
A. Fuselage Assembly (includes installed motor & ESC)
B. Left Wing
C. Right Wing
D. Vertical Stabilizer Assembly
E. Horizontal Stabilizer Assembly
F. Landing Gear Assembly
G. Propeller
H. Hub and Spinner Assembly
I. 8 x 686 mm Carbon Fiber Spar Tube
J. Small Parts Package, Includes:
i. 4x 3.0 x 15 mm Landing Gear Screws
ii. 1x 4.0 x 40 mm Machine Screw
iii. 2x 2.6 x 12 mm Horizontal
Stabilizer Screws
iv. 2x Tail Wheel Control Springs
v. 2x Control Linkages
(Rudder and Elevator)
vi. 2x 4.0 x 75 mm Machine Screws
for Wing
FEATuRES AND SPECIFICATIONS
ITEMS REQuIRED TO READY THIS MODEL FOR FLIGHT
PARTS LAYOuT AND LISTING
4