Heath Consultants Sure-Lock All Pro User Manual
Page 29

26
(Correct - Grounding attachment allows signal
(Correct. - The coupler clamp jaws are closed
around the conductor. The conductor is
energized)
(Incorrect - Terminated end (open circuit). The
(Incorrect - The coupler clamp jaws are
clamped to the conductor. The conductor is not
energized)
Figure 2-8
Figure 2-9
Conductive/ Inductive Mix
outputs are only available with the transmitter set to “ALL OUTPUT” mode.
With no conductive cables attached, the transmitter operates inductively for all
frequencies selected.
Attaching a conductive cable to a respective output will switch that output from
inductive to conductive mode. The other outputs will still be operating in the
inductive mode.
Using the Receiver
A correct understanding of the transmitter’s use is important to assure proper
signals at the receiver’s location. As a highly developed computerized instru-
ment, the Sure-Lock is capable of providing remarkable accuracy in a wide