Hatteland Display HT B22 (Fanless) - Manual (Page 7)

DOC101357-1_ - rev 2 – 2013-09-23 - Created by:6644
Page 7 of 25
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com
HD CAN Module Programmer’s Guide (Windows)
All intellectual properties belongs to Hatteland Display AS
/** @brief J2534 PassThru function numbers */
enum passThruFuncNum
{
NO_FUNCTION = 0 ,
PASSTHRU_OPEN ,
PASSTHRU_CLOSE ,
PASSTHRU_CONNECT ,
PASSTHRU_DISCONNECT ,
PASSTHRU_READ_MSG ,
PASSTHRU_WRITE_MSG ,
PASSTHRU_START_PERIODIC_MSG ,
PASSTHRU_STOP_PERIODIC_MSG ,
PASSTHRU_START_MSG_FILTER ,
PASSTHRU_STOP_MSG_FILTER ,
PASSTHRU_SET_PROGRAMMING_VOLTAGE ,
PASSTHRU_READ_VERSION ,
PASSTHRU_GET_LAST_ERROR ,
PASSTHRU_IOCTL ,
PASSTHRU_GET_STATUS ,
PASSTHRU_RESET ,
};
static unsigned long deviceId ;
static unsigned long channel_1 ;
static unsigned long channel_2 ;
static unsigned long filterId [ FILTER_NUM ];
static unsigned long periodMsgId [ PERIODIC_MSG_NUM ];
static PASSTHRU_MSG txPassThruMsg [ PASSTHRU_MSG_NUM ];
static PASSTHRU_MSG rxPassThruMsg [ PASSTHRU_MSG_NUM ];
static PASSTHRU_MSG filterMaskPassThruMsg ;
static PASSTHRU_MSG filterPattPassThruMsg ;
static void callPassThruOpen ();
static void callPassThruClose ();
static void callPassThruConnect ();
static void callPassThruDisconnect ();
static void callPassThruReadMsgs ();
static void callPassThruWriteMsgs ();
static void callPassThruStartMsgFilter ();
static void callPassThruStopMsgFilter ();
HINSTANCE dllLib
;
PassThruOpen_t PassThruOpen
;
PassThruClose_t PassThruClose ;
PassThruConnect_t PassThruConnect ;
PassThruDisconnect_t PassThruDisconnect ;
PassThruReadMsgs_t PassThruReadMsgs ;
PassThruWriteMsgs_t PassThruWriteMsgs ;
PassThruGetLastError_t PassThruGetLastError ;
PassThruStartPeriodicMsg_t PassThruStartPeriodicMsg ;
PassThruStopPeriodicMsg_t PassThruStopPeriodicMsg ;
PassThruStartMsgFilter_t PassThruStartMsgFilter ;
PassThruStopMsgFilter_t PassThruStopMsgFilter ;
PassThruIoctl_t PassThruIoctl ;
PassThruSetProgrammingVoltage_t PassThruSetProgrammingVoltage ;
PassThruReadVersion_t PassThruReadVersion ;