Hanna Instruments HI 9141 - Manual (Page 2)

3 2
Remove the instrument from the packing
material and examine it to make sure that no
damage has occurred during shipping. If there
is any damage, immediately notify your dealer.
Each meter is supplied complete with:
•
HI 76407/4 DO probe with 4 m cable
• HI 7041S electrolyte solution (30 mL)
• Protective cap
• 2 spare membranes with O-ring
• 5 pPaper rolls
• Batteries (4 x 1.5V AA)
• Instruction manual
• Rugged carrying case
Note: Save all packing material until you are
sure that the instrument functions
correctly. All defective items must be
returned in the original packing with
the supplied accessories.
Dear Customer,
Thank you for choosing a HANNA product.
Please read this instruction manual carefully
before using the instrument.
This manual will provide you with all the neces-
sary information for a correct use.
If you need additional technical support, do not
hesitate to e-mail us at [email protected]
These instruments are in compliance with the
directives.
TABLE OF CONTENTS
Warranty ..................................................... 3
Preliminary Examination ............................. 3
General Description .................................... 4
Probe Functional Description ...................... 5
Functional Description HI 9141 ................... 6
Functional Description HI 91410 .................. 7
Specifications ............................................. 8
Initial Preparation ........................................ 9
Calibration ................................................. 11
Taking Measurements .............................. 13
Setting Date, Time, Printing Interval ......... 15
Printing / Recording with HI 9141 .............. 18
Printing / Logging with HI 91410 ............... 20
Altitude Compensation .............................. 24
Salinity Compensation .............................. 25
Temperature Compensation ...................... 25
Probe & Membrane Maintenance ............. 26
Data Transfer to PC (HI 91410) ................. 28
Fault Functions ........................................ 29
Memory Organization (HI 91410) ............... 30
Printer Maintenance .................................. 31
Battery Replacement ................................ 33
Accessories .............................................. 35
WARRANTY
All Hanna Instruments meters are warranted for
two years against defects in workmanship and
materials when used for their intended purpose
and maintained according to the instructions.
Probes are warranted for six months.
This warranty is limited to repair or replacement
free of charge. Damages due to accident, misuse,
tampering or lack of prescribed maintenance are
not covered. If service is required, contact the
dealer from whom you purchased the instrument.
If under warranty, report the model number, date of
purchase, serial number and the nature of the
failure. If the repair is not covered by the warranty,
you will be notified of the charge for repair or
replacement. If the instrument is to be returned to
Hanna Instruments, obtain a Return Goods Autho-
rization from the Customer Service Department
first and then send it with shipment cost prepaid.
When shipping any instrument, make sure it is
properly packaged for complete protection.
PRELIMINARY EXAMINATION