Hanna Instruments HI 9142 User Manual

Page 19

WARRANTY

HI 9142 is guaranteed for two years against defects in workmanship
and materials when used for their intended purpose and maintained
according to instructions. Electrodes and probes are guaranteed for
six months. This warranty is limited to repair or replacement free
of charge.
Damage due to accidents, misuse, tampering or lack of prescribed
maintenance is not covered.
If service is required, contact the dealer from whom you purchased
the instrument. If under warranty, report the model number, date
of purchase, serial number and the nature of the problem. If the
repair is not covered by the warranty, you will be notified of the
charges incurred. If the instrument is to be returned to Hanna
Instruments, first obtain a Returned Goods Authorization number
from the Technical Service department and then send it with
shipping costs prepaid. When shipping any instrument, make sure
it is properly packed for complete protection.

Recommendations for Users

Before using this product, make sure that it is entirely suitable for the
environment in which it is used.

Operation of this instrument in residential area could cause unacceptable
interferences to radio and TV equipment, requiring the operator to take
all necessary steps to correct interferences.

Any variation introduced by the user to the supplied equipment may
degrade the instrument's EMC performance.

To avoid electrical shock, do not use this instrument when voltages at the
measurement surface exceed 24 Vac or 60 Vdc.

To avoid damages or burns, do not perform any measurement in microwave
ovens.

In particular cases the meter could turn off. In these cases it can be turned
on by pressing the ON/OFF key.

Hanna Instruments reserves the right to modify the design, construction

or appearance of its products without advance notice.

All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.