beautypg.com

Hanna Instruments HI 8564 User Manual

Page 8

background image

14

15

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using these products, make sure that they are entirely
suitable for the environment in which they are used.

Operation of these instruments in residential area could cause
unacceptable interferences to radio and TV equipments, requiring
the operator to take all necessary steps to correct interferences.

In HI 8564 the trimmers are sensitive to electrostatic discharge.
It is recommended to use an antistatic screwdriver during calibra-
tion.

Any variation introduced by the user to the supplied equipment
may degrade the instrument's EMC performance.

To avoid electrical shock, do not use these instruments when
voltages at the measurement surface exceed 24 Vac or 60 Vdc.

To avoid damages or burns, do not perform any measurement in
microwave ovens.

ACCESSORIES

HI 70601/2

RH probe for HI 8564 with built-
in temperature sensor and 2 m
(6.6') cable

HI 70601/5

RH probe for HI 8564 with built-
in temperature sensor and 5 m
(16.5') cable

HI 710001

Soft carrying case for HI 8564

HI 710007

Blue shockproof rubber boot
for HI 93640

HI 710008

Orange shockproof rubber boot
for HI 93640

HI 710009

Blue shockproof rubber boot
for HI 8564

HI 710010

Orange shockproof rubber boot
for HI 8564

HI 710011

Probe sintered cap for HI 93640

HI 710031

Rugged carrying case

HI 7101

RH calibration chamber for
HI 8564

HI 7102

RH calibration chamber for
HI 93640

HI 7111/P

Spare saturation LiCl salts for
low humidity calibration (15 g,
6 pcs)

HI 7121/P

Spare saturation NaCl salts for
high range humidity calibration
(33 g, 6 pcs)

Hanna Instruments reserves the right to

modify the design, construction and appear-

ance of its products without advance notice.

This manual is related to the following products: