Hanna Instruments HI 93114 User Manual

Page 15

of the display to remind the user that every time
a measurement is taken, the value is stored in
the next available lot number.

REVIEWING THE LOGGED BUFFER

To review the memo-
rized values, press to-

gether ALT and .

The meter will scroll all the data in the buffer
showing the lot number, value, date and time.

e.g. The first recorded reading in the buffer is

lot # 0, 0.35 mg/L of Free Chlorine,
memorized on 23

August at 3:34 pm;

The second logged data relates to lot
# 1, 1.35 mg/L of the customized param-
eter, logged on 23

August at 3:55 pm.

First lot

Second lot

CLEARING THE MEMORY

After all the buffer (memory) is taken up, the
LCD will blink “Full”.

LOGGING

HI 93114 allows user to log 25 time/day-tagged
measurements. User can easily turn the log-
ging mode on and off, review the logged
memory, review the current lot number and
clean the buffer (memory). HI 93114 also
reminds the user if its memory is full.

TURNING THE LOG MODE ON OR OFF

Enter the diagnostic
mode by pressing ALT
and CAL together.

Select mode 12 and press the

key.

The display will show the current (vacant) lot
together with “LOG” if the log mode is on.
Otherwise it will show “----” if the log mode is
off.

By pressing the

key, the meter toggles

between the Log on and off positions. If the
log on mode is selected, every time a mea-
surement is taken (READ pressed) the rel-
evant values will be stored in the current
(vacant) lot number.

To quit diagnostic
mode, press ALT and
CAL together again.

The LCD will then show “CAL” and “Stor” for a
few seconds. If the log on mode was selected
“LOG” will appear on the bottom left hand side

To quit diagnostic mode,
press the ALT and CAL
keys together again.