Hanna Instruments HI 8427 User Manual

Page 8

WARRANTY

All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended
purpose and maintained according to instruc-
tions. The electrodes and the probes are
warranted for a period of six months. This
warranty is limited to repair or replacement
free of charge.

Damages due to accidents, misuse, tamper-
ing or lack of prescribed maintenance are not
covered.

If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. If the repair is not covered by the
warranty, you will be notified of the charges
incurred. If the instrument is to be returned to
Hanna Instruments, first obtain a Returned
Goods Authorization number from the Cus-
tomer Service department and then send it
with shipping costs prepaid. When shipping
any instrument, make sure it is properly pack-
aged for complete protection.

To validate your warranty, fill out and return the
enclosed warranty card within 14 days from
the date of purchase.

Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using these products, make sure that they are entirely suitable for the environment
in which they are used.

Operation of these instruments in residential area could cause unacceptable interfer-
ences to radio and TV equipments, requiring the operator to take all necessary steps to
correct interferences.

Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance.

In HI 8427, with an applied field of 3V/m, no leakage is signaled by the LEAKAGE led.

To avoid damages or burns, do not perform any measurement in microwave ovens.

This manual is related to the following products:

HI 931001