Warranty – Hanna Instruments pH 211R User Manual

Page 12

WARRANTY

All Hanna Instruments meters are guaranteed for two years against defects in
workmanship and materials when used for their intended purpose and maintained
according to instructions.
Electrodes and probes are guaranteed for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed maintenance
are not covered.
If service is required, contact the dealer from whom you purchased the instrument.
If under warranty, report the model number, date of purchase, serial number and
the nature of the failure.
If the repair is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization number from the Customer Service department and
then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packaged for complete
protection.

All rights are reserved. Reproduction in whole or in part is prohibited without the
written consent of the copyright owner.

Hanna Instruments reserves the right to modify the design, construction and

appearance of its products without advance notice.

Extension cables for screw-type electrodes (screw to BNC adapter)

HI 7855/1

Extension cable 1 m (3.3') long

HI 7855/3

Extension cable 3 m (9.9') long

OTHER ACCESSORIES

HI 710005

Voltage adapter, 115 Vac / 12 Vdc, US plug

HI 710006

Voltage adapter, 230 Vac / 12 Vdc, European plug

HI 710012

Voltage adapter, 230 Vac / 12 Vdc, UK plug

HI 710013

Voltage adapter, 230 Vac / 12 Vdc, S.Africa plug

HI 710014

Voltage adapter, 230 Vac / 12 Vdc, Australian plug

HI 76404

Electrode holder

HI 7669/2W

Temperature probe with 1 m (3.3') cable

HI 8427

pH/ORP electrode simulator

HI 931001

pH/ORP electrode simulator with LCD

HI 98501

ChecktempC pocket-size thermometer (range: -50.0
to 150.0°C)

CONNECT TO
SCREW TYPE

ELECTRODES

CONNECT TO THE

BNC SOCKET

OF THE METER

HI 7855 SERIES CABLE CONNECTORS

CONNECTOR AND 3.0 mm (0.12") CABLE WITH BNC

Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is
used. Operation of this instrument in residential areas could cause unacceptable interferences to radio
and TV equipment, requiring the operator to take all necessary steps to correct interferences.
The glass bulb at the end of the pH electrode is sensitive to electrostatic discharges. Avoid touching
this glass bulb at all times. During operation, ESD wrist straps should be worn to avoid possible
damage to the electrode by electrostatic discharges.
Any variation introduced by the user to the supplied equipment may degrade the instrument's EMC
performance.
To avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed
24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave ovens.