Hall Research DVS-2A - Manual (Page 7)

2-Port DVI Switch with Audio & Serial Control
5
3.0 Installation
. Required Cables
The video input cables are generally DVI male to male (customer
furnished). The Audio inputs are 3.5 mm mini-stereo (customer
furnished). To connect to the unit to a Serial port (such as PC’s COM1)
you would need a Male/Female DB9 Serial Cable (customer furnished).
All of these items are available for purchase upon request.
. Inputs & Outputs
The DVS-2A has 2 video and audio inputs labeled ‘Input 1’ and ‘Input 2’.
The unit has 1 video and audio output labeled ‘Output’.
. Connecting the DVS-2A
Connect your video and audio sources such as computer or notebook PC
to ‘Input 1’ and ‘Input 2’.
Connect the display device such as a monitor (or a video projector) to the
switched video and audio outputs (SW Output).
Connect the included power supply to the DVS-2A.
Select the desired mode of operation including the priority for your video
and audio output using the front panel switched buttons.
If preferred, the selection can also be done through RS-232 serial
commands by connecting a DB9 RS-232 Serial cable to your PC and the
DVS-2A.
The device can be mounted via a Universal Mounting Bracket (sold
separately) if desired.