Hall Research SC-VGA-2A - Manual (Page 6)

Model SC-VGA-2
4
• Allows fine-tuning the output picture to optimum through
adjustment of sampling clock, phase, and position on screen.
• Easy- to- use push buttons and OSD menu control.
• Can Mirror VGA output Horizontally; perfect for teleprompting
and rear projection systems
2. Installation
2.1 Input connection
The SC-VGA-2 can accept both PC and HDTV inputs. When
accepting a PC input use the 15-pin D-sub cable to connect the output
of a PC device to the input connector labeled PC/HDTV on the back of
SC-VGA-2.
When accepting a HDTV input use a15-pin D-sub to YPbPr/3 RCA
cable to connect the YPbPr/output (or YCbCr) of a HDTV device to
the PC/HDTV input connector of the SC-VGA-2.
The SC-VGA-2 can automatically detect the mode and resolution of
the PC/HDTV input.
2.2 Output connection
The SC-VGA-2 can output a variety of PC resolutions as well as a
number of HDTV resolutions.
When one of the PC resolutions is selected as output, use the 15-pin D-
Sub VGA cable to connect the PC/HDTV output of the SC-VGA-2 to
the VGA input of a display monitor.
When one of the HDTV resolutions is selected as the output, use a 15-
pin D-Sub to YPbPr/3 RCA adaptor cable to connect the PC/HDTV
output of the SC-VGA-2 to the YPbPr input of a HDTV device.
________ Note _______
If you need a 2 nd un-altered version of the input Video, please
use a Model 200 Video Splitter at your video source. For
example when the SC-VGA-2 is set to mirror the video, you can
have a mirrored and a non-mirrored output.