Hall Research SC-CSV-HDMI - Manual (Page 9)

VGA / HDTV Video Processor
7
OUTPUT
Use arrows to adjust output mode. Refer to Section 5.2 below for
a list of all available modes.
The default output resolution after a factory reset is “NATIVE”
with the input source set to “AV”.
The unit has non-volatile memory and memorizes all your
settings before power off and recalls those settings on the next
power on.
At any time, pressing the UP ARROW ▲ and MENU button
together will change the output resolution to XGA@60Hz.
Pressing the MENU and DOWN ARROW ▼ together will
change the output resolution to 480P@60 Hz.
OSD
When selected, a sub menu of input signal capture adjustments
will appear.
H-POSITION – Adjust horizontal position of the OSD on the
screen. (default = 10)
V-POSITION – Adjust vertical position of the OSD on the screen.
(default = 90)
TIMER – Select the number of seconds for the OSD to be
displayed on the screen before turning off. (default = 10)
BACKGROUND – Changes opacity of the OSD background on
the screen. (default = 63)
Factory Reset
Select this option to reset all values to the factory defaults. Since
this sets the INPUT source as “AV”, you may need to select the
“S-VIDEO” source by pressing the “-“ button with no OSD
selected to get a picture.
Information
Displays source type, Input resolution, output resolution and
firmware version.
Mirror
If enabled; this function will flip the image horizontally on the
screen.