Hall Research U97-H2 User Manual
Page 9
KVM EXTENSION OVER UTP FOR DUAL VIDEO PC’s
7
How to control the video compensation
The digital video compensation is controlled by hot keys on the remote
keyboard. The hot key sequence is “Scroll Lock” “Scroll Lock” “a” for the A
video channel or “Scroll Lock” “Scroll Lock” “b” for the B video channel . You
will have 2 seconds between each keystroke to successfully complete the hot
key sequence. Once the hot key sequence has been successfully completed,
you will see the Num Lock, Scroll Lock, and Caps Lock LED’s cycling on the
Remote Keyboard. This will indicate you are in the video adjustment mode.
Use the “+” and “-“ keys to increase or decrease the video compensation as
necessary. Pressing the “Enter” key will adjust the video compensation to full
compensation. Pressing the “Esc” key will adjust the video compensation to no
compensation. Press any key other than “+”, “-“, “Enter”, or “Esc” to exit the hot
key sequence. When you exit the hot key sequence, the LED’s on the
keyboard will stop cycling and will return to their previous state