Hall Research U97-H2 - Manual (Page 6)

Model U97-H2
4
Setup
Figure 2 U97-H2 Sender Connector and Indicator Functions
Figure 3 Cable for connection to PC
1. Power down the PC
2. Use the special “KVVM” (4-in-1) cable to connect the Sender unit
to the PC.
a.
The end with the 4 connections connects to the PC
b. The other end connects to the Sender via the DB25-15
connector labeled “INPUT”
NOTE: The connection between the PC and the Sender is NOT
hot-pluggable.