Hall Research SP-HD-4A - Manual (Page 4)

User’s Manual
4
3. Package Contents
• One SP-HD-4A HDMI Splitter
• One Users Manual
• One Power Supply
Input: 100 – 240V AC @ 50/60Hz,
Output: +5V DC, 2.6A DC, 13 Watts
Note: HDMI Cables are not supplied with this unit. Please order those separately
4. Controls, Functions and Indicators
Power Indicator
The power indicator is illuminated when power is applied to the unit.
Locking DC Input Power Jack
Only use the power supply provided with the splitter. The power supply cable is secured to
the splitter via a threaded sleeve preventing accidental disconnection.
Input Video Indicator
This LED will illuminate when a valid video signal is detected on the input
EDID Selection Switch
Default position is NORM. In this mode the unit will scan the outputs and create an EDID
based on connected LCD’s. In EMUL mode the unit will use a generic EDID that is
independent of connected LCD’s. Read more about EDID in the next section.