Dynex DX-26L150A11 User Manual
Page 2
2
If you are using cable connected directly to the TV:
1. Press
MENU. The on-screen menu opens.
2. Press
◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press
◄ or ► to select Cable.
4. Press
▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press
◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
If you are using an antenna:
1. Press
MENU. The on-screen menu opens.
2. Press
◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press
◄ or ► to select Antenna.
4. Press
▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press
◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
2. I am programming my universal remote, what code is needed?
Use the following table to obtain the correct remote code:
o Note: The brand name is often visible on the front of the universal remote control, and the
model number is often visible on the back.
o Note: If the universal remote control isn’t listed in the chart, refer to your universal remote
control’s instructions and try codes for other brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
PHDVD5,
PH5DSS,
PMDVR8,
PDVR8
RCA
RCU807
One for
All
URC-
6690
Sony
RM-VL600
115
135
0464
8043
Set-top box manufacturer and model
Comcast
M1057
Dish
Network
VIP508,
VIP622
Motorola
DRC800
TIVO
Series 3, HD
DirecTV
RC23
0463
720
0463
0091
10463
o Codes for other universal remotes are available online at:
Follow your universal remote control’s instructions to enter the code.